SEO Version
35
6. Drive truck under auger discharge and set
brakes.
7.
Starting:
a.
Start the tractor and run at low idle.
b. Place the hydraulic circuit in detent.
Engage the PTO.
c. Increase the engine RPM to mid-
range.
d. Place the hydraulic drive control in de-
tent.
e. Set the speed using the fow control.
Do not exceed the capacity of the sys-
tem.
f. Increase engine RPM if desired to pro-
vide an even fow of grain.
Fig. 31 POSITIONED
Fig. 32 CONTROLS
IMPORTANT
It is recommended that 2 people be
involved when operating the Extrac-
tor. One person on the operator's
platform and the truck driver in the
tractor cab to monitor the operation.
The truck driver is then available to
shut everything down if required.
NOTE
It is recommended that the
truck driver operate the
tractor during the loading/
unloading operation.
IMPORTANT
Do not set park brake on tractor Extractor
must be able to move both the machine
and the tractor into the bag during opera-
tion. Setting the park brake on the tractor
will prevent this.
Powered by FlippingBook Publisher